Reverse Osmosis System Filters, RO Membranes and Parts

Water Filter Heads

  1. Everpure QC-71 Head #EV9272-24 Twin Head Series Flow Design Water Filtration System
    Everpure QC-71 Head #EV9272-24 Twin Head Series Flow Design Water Filtration System
    Everpure QC-71 Head #EV9272-24 Twin Head With Series Flow Design - Series flow provides flow to one filter and then the next. All water flows through both filters in Series. This is different than Parallel Flow, where the flow rate is increased by providing two flow paths, one through each filter only. This QC-71 in Series Flow provides the maximum filtration from the selected cartridges. 1/2 GPM Flow rate. Replaces the QC-4 Twin Head for THM, VOC & H1200 systems, among others.
    Learn More
    $329.99 Special Price $199.99 As low as $179.99
  2. Easy Tap Water Feed Valve for Water Filter Systems - 2000
    Easy Tap Water Feed Valve For Water Filter Systems 3/8" Feed Tube

    Easy Tap Water Feed Valve For Systems With 3/8" Feed Tube - High flow tap valve. Follow the pipe up from the shut-off valve toward faucet until you reach a coupling nut (may be all the way up to the faucet). Unscrew coupling nut. Screw brass easy tap onto previous location of coupling nut. Hand tighten and then one more complete turn with wrench. Re-attach water line coupling nut to easy tap. The valve on the side of the easy tap is the shut off valve for your new RO system. If the handle is turned clockwise all of the way, this is the "OFF" position for your new RO system. Counterclockwise all of the way is the "ON" position.

    Learn More
    $16.99 Special Price $8.99 As low as $4.99
  3. Self Piercing Feed Water Saddle Tap Valve For Drinking Water Filtration Systems
    Self Piercing Feed Water Saddle Tap Valve For Drinking Water Filtration Systems
    Self Piercing Feed Water Saddle Tap Valve For Drinking Water Filtration Systems With 1/4" Comp - Saddle valve used on copper lines instead of the "screw together" easy tap. Make sure to install it in-line after the cold water shut-off valve. Mount and tighten the self piercing valve on the copper line in a easy to reach place. Turn the saddle valve clockwise all the way in. This drives the sharp end of a sharp metal pierce into the copper tubing and will pierce a tiny hole. This is the "OFF" position for your new RO system. Turn counter-clockwise to open and turn on.
    Learn More
    $8.99 Special Price $6.99 As low as $3.99