CoolerMate CM-1 SR Water Factory
CoolerMate CUNO Water Factory CM-1 SR replacement Water Filter Cartridges are still available from 3M. Listed below are the replacement water filter cartridges for the original CoolerMate CM-1 SR systems.
Water Factory CUNO CoolerMate CM-1 SR Office Drinking Water Products & Water Cooler Filtration Systems
CUNO Water Factory CoolerMATE® Series - THE PERFECT MATE FOR YOUR WATER COOLER
The BENEFITS of CoolerMATE® HIGH ADSORPTION CARBON.
- GET CLEAN, BETTER TASTING WATER FROM YOUR COOLER. CoolerMATE® Systems are tested and certified by NSF International for the reduction of Lead, Suspended Matter, Taste, Odor, and Chlorine.
- Performance carbon adsorption media allows a rapid 0.6 gallon (2.3 liters) per minute delivery to your cooler tank or spigot while providing high lead, dirt, and chlorine removal capacity.
- NO MESS. The systems have patented Sanitary Quick Change (SQC) cartridges for easy change out with no tools, spills or contamination.
- FIT ANYWHERE. The CoolerMATE® fits any make of water cooler.
- All systems come with a 10-year system Warranty and include installation kit.
|CM-1 SR (Scale Reduction)|
Water Factory CoolerMATE® CUNO CM-1 SR Water Cooler Filtration Systems
|FILTER LIFE||2,000 Gallon
*Scale is the build up of calcium deposits in pipes and plumbing fittings
- Pro Products Sani System Water Filtration System SanitizerSani-System ® Pro Products is proud to introduce Sani-System, the first and only EPA product approved for sanitizing water softeners, RO units and Water Coolers. Alos NSF certified. Sani System is proven to kill 99.9% of E. coli, E. coli O157:H7, Staphylococcus aureus, Listeria monocytogenes and other harmful bacteria. It does not use chlorine, other oxidizers or acids that can harm water softener equipment parts. Use is simple; each dose comes in a pre-measured pouch. Just cut, pour and regenerate softener. No measuring, No mess! Sanitizing Equipment! Applications Interior Surfaces of Water Softeners, Reverse Osmosis (RO) Units, Ice Machines, Water Coolers, Water Holding Tanks and Pressure Tanks. Pro Products Sani System Sanitizer. 0.25 fl. oz. concentrate is perfect for your RO reverse osmosis drinking water system sanitizing..Learn More
- Water Factory 47-55706CM/3MROP310 CoolerMate Composite Sediment / Carbon Replacement Water Prefilter by 3M PurificationLearn More
Water Factory ® 47-55706CM CoolerMate Composite Sediment / Carbon Replacement Water Prefilter by 3M Purification. The 47-55706CM has been discontinued and replaced with the 3MROP310. If you order the 47-55706CM you will receive the 3MROP310. Dual action sediment prefilter / carbon prefilter designed for chlorinated water supplies. Combines our dirt & rust water filter cartridge made from an exclusive process using pure white cellulose fibers and high-absorption GAC granular activated carbon. As water passes from the outer surfaces into the center of the cartridge, the filtering pores become increasingly smaller to remove even microscopic particles. Then chlorine and other organics are removed in the bed of granular carbon. 5 Micron Graded Density Sediment Prefilter for Optimal Dirt Holding Capacity. For use as the prefilter in CMRO-3TFC.
- Water Factory 47-55708CM/3MROP416 CoolerMate Carbon Block Replacement Water Filter by 3M PurificationLearn More
Water Factory 47-55708CM CoolerMate Carbon Block Replacement Water Filter by 3M Purification has been replaced by the 3MROP416. If you order the 47-55708CM you will receive the 3MROP416. Carbon block water filters cartridges. High absorption activated replacement carbon block cartridge for high capacity chlorine reduction. Provides high flow stream of drinking water through unique radial flow cartridge design. For use as second cartridge in CM 2 CTO products and as postfilter in CMRO-3TFC systems.
- HM Digital AP-1 AquaPro Water Quality TDS Total Dissolved Solids TesterHM Digital AP-1 AquaPro Water Quality Total Dissolved Solids Tester, 0-5000 ppm TDS Range, 1 ppm Resolution, +/- 2% Readout. HM Digital introduces its new AquaPro series, a line of handheld TDS/EC meters with a sleek design that's perfect for today's modern kitchen. The AquaPro digital water testers are the next generation for today's tech-savvy and health-conscience consumer.Learn More
- John Guest PPSV040808W In-Line Shut-Off Valve 1/4" TubeJohn Guest PPSV040808W In-Line Shut-Off Valve 1/4" Tube X 1/4" TubeLearn More
- Poly Tube John Guest 1/4" PE White Replacement Tubing for Water Filter Systems. PE-16-GI-0250F-N - Poly TubingPoly Tube John Guest 1/4" PE White Replacement Tubing for Water Filter Systems. PE-16-GI-0250F-N - Poly Tubing. Sold by the foot.Learn More
- 3M 6-in-1 Water Test Kit -Simple to Use - DIY In Home Water Quality Test Kit6 in 1 Home Water Test Kit by 3M. Use this 3M DIY water quality test for convenient on-site testing. The 3M DIY water quality test kit provides quick analysis.Learn More
- 3M AP1-E 47-234825 SQC Sanitizing & Service CartridgeLearn More
3M47-234825 SQC Sanitizing Service Reusable Cartridge. AP1-E 3M Service Cartridge for SQC drinking water systems by Water Factory, CUNO and 3M
- 3M 50-1265 RO Sanitizing & Service Plug SQC RO Systems3M 50-1265 RO Service & Sanitizing Plug for 3MRO301, 3MRO401 and 3MRO501 Reverse Osmosis Drinking Water Systems from 3M or any of the Water Factory SQC systems such as the SQC3, SQC4-HF, SQC2 or SQC1. Use these bypass plugs in place of filters during the sanitizing of your RO system. This is must for all SQC reverse osmosis system owners. Order one for each filter in your system.Learn More